ABN 74 657 925 061LICENSED, CERTIFIED AND INSURED
We do the work in-house, to the relevant codes and standards.
For builders, scaffolders and access contractors
Swing stage winch services in Sydney
Electrical and mechanical servicing, inspection, testing, fault finding, rewiring and overhaul for Sky Climber and Power Climber winches and control equipment.
Service options
Specialist servicing for suspended access equipment, with electrical and mechanical work in one workshop. We quote on enquiry, because the work depends on the condition of each winch.
Inspection & testing
Inspection and operational testing of the winch, including assessment of its condition and performance.
6-month preventive mechanical service
A preventive service to find wear, defects and developing problems before they become failures. Service documentation is provided subject to inspection results.
Annual standard service
A comprehensive annual service for winches that need the higher level of servicing identified by inspection, condition or service requirements.
Manufacturer-recommended overhaul
A major overhaul where required, based on equipment condition, manufacturer recommendations and inspection findings.
Electrical fault finding & troubleshooting
Diagnosis and repair of electrical faults involving motors, controls, contactors, wiring, protection and associated equipment.
Complete winch rewire
Replacement of the winch electrical wiring, with associated testing.
6-month preventive service and certification
The 6-month service is a preventive service, not a routine sign-off. Each winch is inspected and assessed for safe operation, mechanical condition and its stated Working Load Limit (WLL).
- Where the winch passes inspection and operates correctly within its WLL, the 6-month service documentation or certificate can be issued.
- If we find a condition that could affect safe operation or load performance, the winch is not simply signed off. Further servicing may be recommended or required before it returns to service.
- We test and tag the equipment, and issue our own service tags and certificate for the equipment we service.
When an annual standard service is required
- Unable to carry the required load or WLL: the winch cannot show satisfactory load performance.
- Slipping: the winch slips, fails to hold correctly or shows abnormal load-holding behaviour.
- Abnormal noise: grinding, knocking, excessive humming or other unusual mechanical noise.
- Oil leakage: visible oil leakage or lubricant escaping from the gearbox or related components.
- Other significant defects: wear, damage or a condition that needs a higher level of service.
In these cases we recommend an annual standard service, not a routine 6-month preventive service.
Why specialist servicing matters
- Electrical and mechanical: swing stage winches and control boxes contain safety-critical electrical and mechanical systems.
- Load performance: a winch should not be judged only by whether the motor runs. Its ability to operate and hold the required WLL is critical.
- Condition-based servicing: inspection findings decide whether a preventive service is enough or further servicing or repair is required.
- Trained by the manufacturer: our service technician is trained by Sky Climber and is also a licensed electrician.
- One workshop: mechanical servicing, electrical fault finding, rewiring, testing and major repairs.
Brands and equipment
Sky Climber and Power Climber winches, plus control boxes, motors, brakes, gearboxes, electrical systems, mechanical components and wiring. We also service Sky Locks (type III 8mm and type II 9mm).
How it works
Send or drop off
Equipment is received at our Revesby workshop.
Inspect
We inspect and assess the winch and advise what it needs.
Service and test
Servicing, overhaul or repair, then testing.
Certify
Test and tag, with service tags and a certificate where the equipment meets the inspection and testing requirements.
Turnaround: currently up to 2 weeks. Urgent service is available on request.
Before you send equipment, please note: the brand and model, serial number, a short description of any fault (slipping, noise, oil leak), and the last service date if you know it.
Our Sky Climber training
Our service technician has a Certificate of Training from N.V. Sky Climber Europe S.A., the manufacturer, in Belgium, issued in September 2025. It qualifies our technician as a service technician for the Hoist Alpha 500/800/1000, Hoist Compact 400 and CX500, and Sky Lock type III 8mm and type II 9mm. You can confirm it with Sky Climber, and we can send you a copy on request.
Sky Climber and Power Climber are trademarks of their owners. We are a trained service provider, not the manufacturer.
Our workshop
15/7 Daisy Street, Revesby NSW 2212
Mon–Fri 7am–5pm, Sat 8am–12pm
Phone 0424 877 818
Common questions
Which brands do you service?
Sky Climber and Power Climber winches and control equipment. Our Sky Climber training covers the Hoist Alpha, Hoist Compact, CX500 and Sky Lock models listed above.
Will every winch get a certificate?
No. Certificates and service documentation are issued only where the equipment meets the applicable inspection and testing requirements.
How long does a service take?
Currently up to 2 weeks. Urgent service is available on request.
How much will it cost?
It depends on the condition of the winch, the parts required and the scope of work. Send us an enquiry and we will quote.
Do you work to standards?
Servicing and testing are carried out in line with the applicable legislation, standards, manufacturer requirements and site procedures.
Send us your enquiry
Tell us about your equipment and we’ll get back to you.
Phone: 0424 877 818
Email: info@powercubeelectric.com.au
Workshop: 15/7 Daisy Street, Revesby NSW 2212
Hours: Mon–Fri 7am–5pm, Sat 8am–12pm